Firm Flux Gel (F&F Gel) – camouflage, multifunctional liquid acrygels in bottles.
F&F Gel is a line with an innovative formula that combines the best properties of a classic gel system with a comfortable consistency of the base. The exceptional strength and rigidity of acrylic will ideally last the entire period of wear, and thanks to its comfortable consistency and perfect self-leveling, it will be easy for a technician with any level of training to work.
Tawny Firm Flux Gel is a silky pink shade. A noble multi-season shade that gives the look an exquisite appeal.
Medium viscosity level among the products of the Acrygel’s subcategory.
Suitable for normal, thin, and weakened nails.
Designed to work in various techniques of the classical gel system: modeling, free edge extension, strengthening, correction, alignment, and repair, work with and without filing.
Suitable for all kinds of lamps:
•LED
•LED/CCFL
•CCFL
•UV
Polymerization in LED, LED/CCFL, UV, and CCFL lamps: 2 min.
How to use
Strengthening the natural nail plate
1.Degrease the prepared nail plate with Eurocleanser.
2.Apply Nail Prep Aid, air dry for 30 seconds.
3.Apply Ultrabond to the entire nail plate for better adhesion to the coating. Air dry for 1 minute.
4.Apply a thin layer of Super Bond Gel/E.MiLac Base Gel. Dry in the lamp for 30 seconds (in between). Complete dry 2 minutes.
5.Strengthen the nail plate using the gel polish technique: apply a thin layer of F&F Gel, add 1 drop to the nail, turn over, center. Dry in the lamp for 2 minutes.
6.If necessary, perform filing. When working in the technique without filing: perform a color or top coating without dispersion removing.
7.Gel consumption per client - 0.7 ml. One bottle - 12-13 clients.
Nail extension using single-use nail forms (2,5-3 points)
1.Degrease the prepared nail plate with Eurocleanser.
2.Apply Nail Prep Aid, air dry for 30 seconds.
3.Apply Ultrabond to the entire nail plate for better adhesion to the coating. Air dry for 1 minute.
4.Apply a thin layer of Super Bond Gel/E.MiLac Base Gel. Dry in the lamp for 30 seconds (in between). Complete dry 2 minutes.
5.Set the nail form for modeling and extend the free edge with F&F Gel. Dry in a lamp for 2 minutes.
6.Modeling the architecture of the nail using F&F Gel. Dry in a lamp for 2 minutes.
7.If necessary, perform filing. When working in the technique without filing: perform a color or top coating without dispersion removing.
8.Gel consumption per client - 2 ml. One bottle - 4 clients.
Gel manicure correction:
1.Remove the previous coating. If necessary, remove the detachments and low the thickness of the source material.
2.Treat cuticules and nail walls.
3.Degrease the prepared nail plate with Eurocleanser.
4.Apply Nail Prep Aid, air dry for 30 seconds.
5.Apply Ultrabond to the entire nail plate for better adhesion to the coating. Air dry for 1 minute.
6.Apply a thin layer of Super Bond Gel/E.MiLac Base Gel. Dry in the lamp for 30 seconds (in between). Complete dry 2 minutes.
7.Perform sealing using Natural Composite / Soft Pink Jelly Gel: seal the free edge along the entire perimeter from one nail ingrowth point to another. Cure in the lamp for 30 seconds (in between). Complete drying in 2 minutes.
8.Add F&F Gel into the cuticle area, the side surfaces, and the nail end (1/3 of the regrown material), restore the architecture of the artificial nail. Cure in the lamp for 2 minutes.
9.Align the sealing edge from the inside with a diamond-coated or carbide rotary file.
10.File and polish the surface of the nail plate. Apply a color or finish coating.
Gel consumption per client: 0.9 ml. One bottle: 10 clients.
